Radio-SkyPipe Help

Using Radio-SkyPipe in Client Mode

In Client Mode you can receive in real-time strip charts being generated by anyone connected to the internet or your local LAN.  Of course, that strip chart must be made available by another R-SP user who is in server mode.  Using the Second Client Mode Chart feature, you may even exchange strip charts simultaneously.

You enter Client Mode by selecting Mode / Client from the menu at the top of the screen.

On your screen will appear a list of available strip chart servers.  If you have selected Check for Servers Online in your Connection Options, the list shown will be those servers which have published themselves on our ILS so that others can connect to them. Your Private Servers List will appear below any published servers if you have so opted. The Show Servers and Hide Servers buttons control the display of this list.  You can also manually enter an IP and Port number by right clicking on the available chart servers list and selecting Manually Enter IP and Port which will bring up the dialog box below:

Usually however you will simply begin receiving the strip chart by clicking on the server entry in the available servers box so that it is highlighted and then click the Connect Button, or by just double-clicking on the entry.  To end the session click the Disconnect button.

Press the button to see the data information page for the server you have connected to.

That's all there is to it!  You will be prompted to save the strip chart in accordance with you Logging Options selections.

Note that even though you are restricted to collecting data locally to a single channel when using the Standard Edition of Radio-SkyPipe, there is no such restriction on how many channels of data you may receive from a single remote server!


Help IndexRadio-Sky Publishing Home